Are you struggling with the ArcGIS Error 1935 on your Windows 7 computer? This frustrating issue can stop you right in your tracks, making it hard to install or update your software.
But don’t worry—you’re not alone, and there are clear steps you can take to fix it. You’ll discover easy solutions that will get ArcGIS running smoothly again. Keep reading to regain control and get back to your work without hassle.
Causes Of Error 1935 On Windows 7
Error 1935 on Windows 7 often happens during ArcGIS installation. This error shows up because of missing or damaged system files. Another cause is conflicts with Microsoft .NET Framework. If the .NET Framework is not installed properly, the error may appear.
Sometimes, Windows Installer service issues can trigger this error. Antivirus software might also block some files during installation. This causes the error to pop up.
Old or corrupted Windows updates can be another reason. The system might not support the new software properly. Also, insufficient permissions can stop the installation and cause error 1935.
| Cause | Description |
|---|---|
| Missing System Files | Critical files needed for installation are damaged or missing. |
| .NET Framework Issues | Improper installation or corruption of .NET Framework components. |
| Windows Installer Problems | Errors in the Windows Installer service disrupt setup processes. |
| Antivirus Interference | Security software blocks installation files or processes. |
| Outdated Windows Updates | Old updates cause compatibility problems with new software. |
| Insufficient Permissions | User lacks rights to install or modify system files. |
Credit: www.youtube.com
Check System Requirements
Check the Windows 7 version on your computer. ArcGIS needs Service Pack 1 or later. Also, make sure your system has at least 4 GB of RAM. The processor speed should be 2 GHz or higher. Free disk space must be at least 2 GB. Verify that .NET Framework 3.5 is installed and enabled. This helps avoid the Error 1935 during installation. Sometimes, missing Windows updates cause this error. Keep your system fully updated. Check for any software conflicts with other programs running. Turning off antivirus temporarily can help. Restart your computer before starting the ArcGIS setup. These steps ensure your system meets the basic needs for smooth installation.
Fix With Windows Updates
Error 1935 in ArcGIS on Windows 7 often happens due to missing Windows updates. Installing the latest updates can fix the problem. Start by opening Windows Update from the Control Panel. Click Check for updates and wait for the list to appear. Look for important updates related to .NET Framework and system security. Download and install all critical updates.
Restart the computer after updates finish. This helps to apply changes fully. Try installing ArcGIS again. If the error still shows, repeat the update process. Sometimes, multiple updates are needed.
Credit: www.scribd.com
Repair .net Framework
The .NET Framework is important for running ArcGIS on Windows 7. Sometimes, it can get damaged or corrupted, causing Error 1935. To fix this, start by repairing the .NET Framework.
Open the Control Panel and go to Programs and Features. Find .NET Framework in the list, then click Change or Repair. Follow the steps on the screen to fix the files.
If this does not work, try downloading the latest .NET Framework version from Microsoft’s official website. Install it and restart your computer. This often solves the error.
Checking for Windows Updates is also helpful. Updates can fix bugs and improve system files that .NET Framework needs.
Use System File Checker Tool
The System File Checker (SFC) tool helps fix damaged system files. It scans Windows files and repairs any errors. This can solve the Arcgis Error 1935 on Windows 7.
To use the tool, open the Command Prompt as an administrator. Type sfc /scannow and press Enter. The scan may take some time. Wait until it finishes.
After the scan, the tool will show if it found any problems. If issues are fixed, try installing Arcgis again. This method often fixes system file errors causing installation problems.
Credit: community.esri.com
Frequently Asked Questions
What Causes Arcgis Error 1935 On Windows 7?
Error 1935 usually occurs due to missing or corrupted Microsoft. NET Framework files.
How Can I Fix Error 1935 During Arcgis Installation?
Repair or reinstall the. NET Framework and run the installation as administrator.
Does Windows 7 Need Updates To Avoid Error 1935?
Yes, installing all Windows updates helps fix system files and prevent this error.
Can Antivirus Software Trigger Arcgis Error 1935?
Sometimes antivirus blocks installation files, causing Error 1935; temporarily disabling antivirus may help.
Conclusion
Fixing ArcGIS Error 1935 on Windows 7 needs patience and care. Check your system updates and required software first. Make sure Microsoft. NET Framework works well. Restart your computer after each step to see changes. Small steps help avoid bigger problems later.
Keep your software clean and updated to prevent errors. This way, your ArcGIS runs smoothly without interruptions. Stay calm and follow each fix carefully. Success comes with steady effort and good practice.
